Printing A Test Page Offline - Fujitsu 10 ppm User Manual

User's Manual

Printing a Test Page Offline

The printer has a status report function which prints a page summarizing
printer option settings and showing samples of resident fonts. Use this
function to check the printer performance offline.
POWER ONLINE DATA
READY
FORM
READY FEED MENU
RESET
MENU
TRAY
CONT.
SELECT ENTER
RESET MFF SELF
PAPER SIZE TEST
Notice:
With the FPS card (option) installed in the printer, the status report is
for either the PCL emulation (standard) or the FPS emulation depending
on the emulation you used for printing the last document; however, the
status report is for the FPS emulation if it is printed immediately after
the printer is turned on. To clearly select the report, use the test menu in
setup mode.
Connecting the Printer to Your Computer
1. Turn the printer on. The
ERROR
printer initializes the
mechanism and then enters
the ready state. The message
display indicates
<<<INITIALIZE>>>
+
WARMING UP,
–
PRINT
FONT
2. Print a test page offline.
Press the
put the printer offline (the
ONLINE indicator turns
off). Press the
button for more than five
seconds. The message display
indicates
the DATA indicator flashes.
A status report page is
printed. Check that the
printing is successful.
GETTING
STARTED
,
then READY .
button to
READY
SELF TEST
SELF TEST and
1-15