Fujitsu DL3100 User Manual page 195

FUJITSU DL3100
User's Manual
Ethernet TCP/IP
When using your printer in a local network with Ethernet
connections and the TCP/IP protocol, you have to assign
address information.
Address information for the Ethernet Port can only be
made available by your network administrator, who has
the necessary rights to install Printers on the network
and/or make any changes.
If you want to set the Ethernet port, you need to use USB
to connect the DLMENU.
The use of Ethernet interface
1. Install Ethernet interface board into the printer. Connect
PC and the printer using the network cable. Turn on the
printer to connect DLMENU. The user interface is shown
as below.
2. Click "Ethernet" in step 1 to display the parameter setup
for Ethernet as below.
Parameters
IP Address
Default Gateway
Subnet Mask
Print server name
DHCP
Function
Printer IP address can be changed
when needed.
Default Gateway
Subnet Mask
Name of the print server
Disable or Enable DHCP.
D-11