Fujitsu DL3100 User Manual page 155

FUJITSU DL3100
Set n/360 inch line spacing
Sets the line spacing to n/360 inch
(0 ≤ n ≤ 255)
Set n/60-inch line spacing
Sets the line spacing to n/60 inch
(0 ≤ n ≤ 85)
Set horizontal tabs
Sets horizontal tab positions (in the current character
pitch) at the columns specified by n1 to nk, as measured
from the left-margin position
(0 ≤ k ≤ 32,1 ≤ n ≤ 255,nk > n(k-1))
Default
Every eight characters
Notes
• The values for n must be in ascending order; a value
of n less than the previous n ends tab setting (like the
NUL code).
• Send an ESC D NUL command to cancel all tab
settings.
• The tab settings move to match any movement in the
left margin.
• A maximum of 32 horizontal tabs can be set.
Set vertical tabs
Sets vertical tab positions (in the current line spacing) at
the lines specified by n1 to nk, as measured from the
top-margin position
(0 ≤ k ≤ 16,1 ≤ n ≤ 255,nk > n(k-1))
Notes
• The values for n must be in ascending order; a value
of n less than the previous n ends tab setting (just like
the NUL code).
• The tab settings move to match any subsequent
movement in the top-margin position.
• Send an ESC B NUL command to cancel all tab
settings.
• A maximum of 16 vertical tabs can be set.
User's Manual
Function Command
ESC + (n)
ESC A (n)
ESC D (n1
n2 . . . nk
NUL)
ESC B (n1
n2 . . . nk
NUL)
C-15