Table of Contents
Advertisement
4. ADVANCED SETTINGS
Menu item
[Background]
• [Background]: Changes the background color. This setting is not selectable
when [Hue] is set for [Custom]. In this case the background color is set on the
[Hue] window.
• [Custom]: Sets a custom background color, or select a preset color. The setting
is changeable when [Background] is set to [Custom]. Change the background
color as follows:
1) Click the (
2) Adjust the slider bar to select a color.
3) Click the [OK] button to save the color, or click the [Cancel] button to cancel
[Depth Scale]
Select where to display the depth scale, [Right], or [Center].
[Net Depth
• [Net Depth Mark]: Shows/hides the net depth mark
Mark]
(depth at the installation position of the net sonde
transmitter).
• [Net Depth Mark ID]: Assigns the net depth mark and
net sonde/net sensor ID (ID number of the transmit-
ter you want to display depth information). Set net
depth mark ID as follows:
1) Click the (
2) Set the net sonde/net sensor ID corresponding to the
3) Click the [OK] button to confirm setting, or click the
Note: The same ID number cannot be set for net mark 0
to net mark 15.
• [Mark Color]: Sets the color for the displayed net depth
marks and the temperature graph.
1) Click the (
2) Select the appropriate sonde number at the right-side of the color selection
3) Adjust the slide bar to change the displayed color of the sonde.
4) Click [OK] to confirm the changes, or click [Cancel] to cancel the changes.
• [Mark Width]: Sets the thickness at which the sonde line is displayed on-screen.
Select a higher setting to increase the thickness.
• [Net Sensor Temp Graph]: The assigned net mark ID (0 - 15) appears on the
net water temperature graph. Only one graph can be displayed,
[Transparency]
Adjusts the level of transparency for the fish graph, target position
graph, and temperature graph. A higher setting increases the transparency, how-
ever the graph bars, scale and indications in the graph are not made transparent.
Note: This equipment uses AlphaBlend technology for transparency processing.
[Mode Gain
Show/hide the mode/gain display (at the top-left corner
Display]
of the screen).
4-4
) icon next to [Custom] to show the color setting window.
changes.
) icon to show the [Mark ID] window.
net mark number (0 - 15). For example, to set [Net
ID0] as [ID20], click the arrow buttons (
ID0] to set [20].
[Cancel] button to escape and restore previous set-
ting.
) icon to show the color selection pop-up
window.
pop-up window.
Description
) for [Net
Sonde marks
Mode
Gain
indication
indication
Advertisement
Table of Contents
Troubleshooting
