Furuno FCV-38 Manual page 136

6. MAINTENANCE AND TROUBLESHOOTING
No. Item name
1 [Refresh] Select to update the display area.
button
2 Port tabs Select a tab to show the corresponding port details in the display area.
• [Serial Port 1] - [Serial Port 5]: Shows incoming NMEA data for ports 1 - 5.
• [Network]: Shows incoming NETWORK port data from the processor unit.
3 Display Shows the incoming data details for the selected port.
area
4 [Settings] Access the output settings window for the selected port.
button Note: This button is not available for the [Network] tab.
• [NMEA Format]: Set the NMEA format to use for data output. Available op-
• [Output Data]: Where [TLL Output] is set to [FURUNO-TLL], select the infor-
• [TLL Output]: Select which TLL data to output. The data will be output when
• [Baud Rate]: Set the data transfer speed. The available options are [600],
When the settings are changed, click the [Apply] button to apply new settings.
*1
*2
To close the [Communication Port Monitor], the [Close Window] icon ( ) at the top-
right corner of the window.
6-8
tions are [Ver1.5], [Ver2.0], [Ver3.0].
Note: Whenever the NMEA format is changed, the settings of all other items
in the window are returned to default.
mation to output. More than one item can be selected, among the following:
[Depth]: Output depth data.
*1
[Temperature] : Output water temperature data.
[Hardness And Roughness]: Output bottom material data (hardness, rough-
ness).
*2
[Fish Size] : Output fish size graph data.
a TLL line is inscribed.
[Off]: No TLL data is output.
[TLL]: Only latitude and longitude
[FURUNO-TLL]: Latitude and longitude
are output. (Requires connection to a FURUNO-TLL compatible device.)
[4800], [38400] (bps).
Note: Set to [38400] when the [TLL Output] setting is [FURUNO-TLL]. The
output interval is delayed with the setting [600] or [4800].
: Requires applicable data.
: Displayed when [Baud Rate] is set to 38400.
Description
*1
are output.
*1
and items selected at [Output Data]