Furuno FCV-38 Manual page 80

3. SCREENSHOTS & DATA RECORDING
4. Select the file to play back, then click [OK]. The selected file is played back. Some
settings, such as gain and fish size measurements, can be adjusted during play-
back.
Note 1: To replay echo data from an external fish finder, set the mode to the one
used to record the data, to ensure proper replay of data.
Note 2: Setting changes such as gain adjustment are not reflected in the echo
data from an external fish finder.
No.
1 [Pause] icon
2 [Stop] Icon
3 [Settings] icon
4 [Loop] icon
5 [Playback Location]
indicator
6 [Playback Speed]
5. Click the Stop icon (
3-8
Name
Pauses the playback. Click the [Play] icon to continue play-
back.
Stops the playback.
Applies your current settings to the playback file. This icon
is shown in green color when in use.
Loops the playback.
Indicates your current location in the overall playback. Se-
lect the slide bar, then drag the locater to change the play-
back location.
Selects the speed to playback the record. The available
options are:
• [2000]/[1500]/[1000]/[500] ms: Play the record at the set
millisecond speed.
• [RT]: Play the record at real time speed (the speed at
which it was recorded).
• [MAX]: Play the record at maximum playback speed.
) to stop the playback.
Description