Card Replacement - Nortel Communication Server 1000S Service Implementation Manual

Card replacement

indicate the application on the Hospitality Integrated Voice Services card is
attempting to log in and communicate with the system ports. When ports are
not assigned on the system, the "acquire failed" message is received.
To prevent excess generation of "acquire failed" messages on the Hospitality
Integrated Voice Services card, follow the steps in Procedure 30.
Note: If the Hospitality Integrated Voice Services card is reset, perform
Procedure 30 after the reset.
Procedure 30
Responding to an "acquire failed" message
1 At the CLI Main Menu: SAdmin/, SMaint/, PAdmin/, AAdmin/, ADebug/,
MIVS/, LOgout, ?, enter AA.
2 At the prompt LOading/, MAnaging/, BAckup/?, enter MA.
3 At the prompt List, SHdow, TErmin, RUN,?, enter TE 7; TE 6;TE 5;TE 4.
Note: Terminate only the number of applications equal to the unused
ports. For example, If only using 6 of eight ports, only terminate two
instances of the application: TE 7 and TE 6.
The Hospitality Integrated Voice Services card is based on PC Card
technology. This allows the Hospitality Integrated Voice Services card to be
removed from the IPE shelf indefinitely or a Hospitality Integrated Voice
Services card to be replaced without losing the configuration data.
Follow the steps in Procedure 31 to replace the Hospitality Integrated Voice
Services card.
Procedure 31
Replacing the Hospitality Integrated Voice Services card
1 Disable the Hospitality Integrated Voice Services card by
and executing the DISC l s c command, where l is the loop, s is the shelf
or module, and c is the card in the module. For Small Systems and
CS 1000 systems, execute the DISC s c command.
2 Remove the Hospitality Integrated Voice Services card from its card slot.
Hospitality Integrated Voice Services Service Implementation Guide
Maintenance Page 119 of 136
access
ing LD 32