Mitsubishi Electric CR800 Series Instruction Manual page 54

3Installing the option devices
11) Fix the top plate with metal fittings (4 pcs.) of CR800-MB.
CAUTION
CAUTION
CAUTION
CAUTION
Fig. 3-4 ： Controller installation drawing
Installing and wiring of CR800-MB is completed.
3-42 Installing and wiring of the controller protection box (CR800-MB)
When you do not connect T/B to CR800-MB, be sure to connect T/B cap to TB
connector.
Install a controller option before combining a controller and CR800-MB.
When CR800-MB is used vertically, exchange for the screws of the left side the rubber
legs attached to the bottom.
Always transport CR800-MB by two people or more. (Mass of CR800-MB: 20kg)