Mitsubishi Electric FR-V500 Series Instruction Manual page 66

Name
Station number setting for performing communication operation from the PU connector
Communication
117
using a computer link.
station number
0 to 31: Specify the station number of the inverter.
48:4800bps
Communication
118
96:9600bps
speed
192:19200bps
0: Stop bit length 1 bit/data length 8
Stop bit length/data
1: Stop bit length 2 bits/data length 8
119
length 10: Stop bit length 1 bit/data length 7
11: Stop bit length 2 bits/data length 7
0: None
Parity check
120
1: With odd parity check
presence/absence
2: With even parity check
Number of
Set the permissible number of retries at data receive error occurrence. When you set
121 communication
"9999", the inverter will not make an alarm stop if a communication error occurs.
retries 0 to 10, 9999
Set the communication check time interval. If communication continues for longer than
the set time, the inverter will come to an alarm stop.
0: No communication
Communication
122
0.1 to 999.8s: Communication check time interval
check time interval
9999: Check stop
When making communication, set any value other than 0 as the communication check
time interval.
Set the waiting time between data transmission to the inverter and response.
123 Waiting time setting
0 to 150ms
9999: Make setting using communication data.
0: Without CR/LF, 1: With CR/without LF, 2: With CR/LF
124 CR/LF selection
After setting the parameter, make a reset. The setting is reflected after the
reset is made. (Pr. 117 to Pr. 120, Pr. 123, Pr. 124)
Select the action of PID control.
128 PID action selection
10, 11, 30, 31
PID proportional
Set the proportional band for PID control.
129
band 0.1 to 1000%, 9999
Set the integral time for PID control.
130 PID integral time
0.1 to 3600s, 9999
Set the upper limit value for PID control.
131 Upper limit
0 to 100%, 9999
Set the lower limit value for PID control.
132 Lower limit
0 to 100%, 9999
PID action set point
Set the PID action set point value for PU operation.
133
for PU operation 0 to 100%
Set the PID differential time for PID control.
134 PID differential time
0.01 to 10s, 9999
Backlash
140 acceleration stopping
speed
Backlash
Used for measures against the backlash of reduction gear, etc.
141 acceleration stopping
Acceleration stopping speed (0 to 3600r/min)
time
Acceleration stopping time (0 to 360s)
Backlash
Deceleration stopping speed (0 to 3600r/min)
142 deceleration stopping
Deceleration stopping time (0 to 360s)
speed
Backlash
143 deceleration stopping
time
Set the number of motor poles when displaying the motor speed.
Speed setting
144
When Pr. 37 = 0
switchover
0, 2, 4, 6, 8, 10
145 Parameter for the option (FR-PU04V)
Output current
150
Set when outputting the output current detection signal.
detection level
0 to 200% (Pr. 150)
Output current
0 to 10s (Pr. 151)
151
detection period
Zero current
152
Set when outputting the zero current detection signal.
detection level
0 to 200.0% (Pr. 152)
Zero current
0 to 1s (Pr. 153)
153
detection period
Outline
CAUTION
63
Function list (Extended function parameters)
Cus-
Factory tomer
Setting Set-
ting
0
192
1
2
1
0
9999
1
10
100%
1s
9999
9999
0%
9999
30r/min
0.5s
30r/min
0.5s
0
150%
0
5.0%
0.5s
At-a-glance Guide to
Functions
: Usable function
× : Unusable function
* : Functions that can be used
for parameter-set position
control
Vector Control
Speed Torque Position
control control control
× ×
× ×
× ×
× ×
× ×
× ×
× ×
×
×
×
×
5