Kohler KD83V16 Service And Repair Manual page 197

Service and Repair Manual
Mount the turning device
Fig. 229: Mounting the turning device
1 Screws (M16x35 -8.8)
2 Turning device
To mount the turning device:
u Unscrew screws 4.
u Remove cover 3.
u Position turning device 2.
u Mount and tighten screws 1 according standard torques values.
Information
For queries, please contact your nearest authorized Kohler service representative.
Use the turning device
q The turning device is mounted on the engine.
Depending on the required setting:
u Engage a manual wrench tool to turn the wheel from the turning device which drives the
flywheel gear rim.
u Turn the engine flywheel to the required position or as long needed by turning the wrench.
u Disengage the manual wrench each time you stop to turn.
At the end of the setting:
u Dismount the turning device and mount the cover on the flywheel housing.
u Tighten the turning device cover bolts according standard torques values.
KD83V16 33525088901_1_1 EN_US
2019-02
3
4
© 2019 by Kohler Co. All rights reserved.
Tools and devices
Cover
Screws (M16x25 -8.8)
Tools
197