Kohler KD83V16 Service And Repair Manual page 115

Service and Repair Manual
Tightening specifications
q Put all parts in place and tighten by hand before following the sequence.
1
2
3
4
Tab. 24: Tightening sequence Injector
1
Tab. 25: Electrical Group - Tightening values
Fig. 125: Injector
KD83V16 33525088901_1_1 EN_US
2019-02
Side Bolt / Tie rod.
Nut (Distributor
block and
injector)
Clamp (Allen
screw)
Nut (Distributor
block)
Nut (Injector)
Side Bolt / Tie rod.
Electrical wires
© 2019 by Kohler Co. All rights reserved.
Sequence
From to
Pre- 23 Nm
tighten 17 ft-lb
Tighten 60 Nm
44 ft-lb
Tighten 189 Nm
139 ft-lb
Tighten 150 Nm
111 ft-lb
Sequence
From to
0,5 Nm
(0.36 ft.lb)
Repair
Fuel system
Angle (°) Checked
Angle (°) Checked
115