Kohler KD83V16 Service And Repair Manual page 147

Service and Repair Manual
Fig. 159: Installing distribution block and pipes
u Insert o-ring 9 in distribution block 7.
u Position distribution block 7 with screws 6 on oil entry of turbocharger bracket.
u Tighten screws 6 to torque.
u Install and tighten flange joints 1, 8 to torque.
u Grease orifice 12.
u Install pipe 10 with orifice 12, screws 11 and seal 13 between flange joint 8 and crankcase.
u Install pipe 2 with flange joints 1 on oil entry of turbocharger bracket.
u Tighten screws 11 to torque.
u Install plate 4 and clamps 3 with screws 5.
u Tighten screws 5 to torque.
Setting values
/
Tightening specifications
/
KD83V16 33525088901_1_1 EN_US
2019-02
© 2019 by Kohler Co. All rights reserved.
Repair
Exhaust gas system
147