Kohler KD83V16 Service And Repair Manual page 196

Tools and devices
Tools
Special tool
Tab. 45: Special tools
4.1.2 Turning device
Safe handling of the turning device
The turning device is used to turn a gearwheel which drives the flywheel gear rim, and is mounted
on the engine on delivery.
NOTICE
Risk of engine main failure by forgotten turning device
Keeping the turning device screwed on the flywheel housing while operating the engine will lead to
a break of the turning device and to an engine main failure!
u Dismount immediately the turning device and mount the cover on the flywheel housing.
WARNING
Risk of crushing, shearing, cutting or severing by use of the turning device
Using the turning device can lead to injuries to personnel working on the engine!
u Before using the turning device, prevent the personnel in the vicinity of the engine and get
confirmed they stand in a secure area.
WARNING
Risk of injuries by ejected tools or turning devices parts
Keeping the turning device screwed on the flywheel housing or the wrench tool on the turning
device while operating the engine can lead to injuries by tool ejection or break of turning device!
u Check for spring function of the turning device. If faulty, replace by new turning device.
u Always take away the wrench tool from the turning device, after the flywheel has been turned.
u Dismount immediately the turning device and mount the cover on the flywheel housing.
Information
The wrench tool and the turning device are available for maintenance task only.
Please contact your nearest authorized Kohler service representative.
196
Designation
Coolant Connector Pipe Tool
© 2019 by Kohler Co. All rights reserved.
Service and Repair Manual
Qty Ident KOHLER Ident
number
1 11343242 230612686
KD83V16 33525088901_1_1 EN_US
2019-02