General Safety Instructions; Safety While Commissioning - Kohler KD83V16 Service And Repair Manual

Service and Repair Manual
2.5 Safety instructions

2.5.1 General safety instructions

DANGER
Failure to follow safety and hazard instructions will result in death or serious injury.
Death or serious injury by failure to follow safety and hazard prevention instructions.
u Follow and enforce the safety instructions according this operator and maintenance manual, the
application set manual and local regulations.
The machinery owner must apply following requirements:
– Before receiving the engine, the responsibilities and the definition of the safe conditions have to
be established by the machinery owner.
– Only trained and instructed operators expressly authorized to do so must install, operate, main-
tain or repair the engine and the machinery.
– Only allow operators who have been trained, instructed or are present for training purposes, to
work on the engine or the machinery under constant supervision of an experienced supervisor.
Organization commitments for the machinery owner:
– The Operation and Maintenance Manual of the engine has to be at the operator's disposal until
the commissioning of the machinery. Afterwards the Operator and Maintenance Manual has to
be a part of operator's manual of the manufacturer of the machinery.
– Familiarize yourself with the Operation and Maintenance Manual of the machinery before
commissioning the machine.
– Develop, document, implement, and enforce a safety and health program, adapted to the
machinery and its environment, and comply with the local regulations or at least with the Inter-
national Labour Organization Standards.
– Make sure that operators are conscious of safety and hazards involved in their work and that
they regularly check the Operation and Maintenance Manual of the machinery. This is especially
to be repeated for the operators which occasionally operate the machinery.
NOTICE
Risk of engine failure by use of non-compliant operating fluids!
Use of non-compliant operating fluids will lead to engine main failure.
u Use only operating fluids tested and approved by Kohler Co.
NOTICE
Risk of engine failure by use of non-original spare parts!
The use of original spare parts guarantees the compliance with the technical requirements estab-
lished by Kohler Co.
u Use only original spare parts approved by Kohler Co.

2.5.2 Safety while commissioning

Before initial operation, the owner must check that the installation complies with local regulations
and instructions of the manufacturer of the application set.
Always ensure that:
– All installation, maintenance, and repair work are fulfilled.
– All loose parts and tools have been fixed or removed, especially safety devices.
– Each operator has been properly trained, and applies the local safety measures.
KD83V16 33525088901_1_1 EN_US
2019-02
© 2019 by Kohler Co. All rights reserved.
Safety
Safety instructions
45