Kohler KD83V16 Service And Repair Manual page 114

Repair
Fuel system
Fig. 123: Installing high pressure pipe
u Lubricate threads and o-rings of high pressure pipe 5 with oil.
u Lubricate threads of adaptor 9 and injector 4.
u Lubricate o-rings of adaptor 9.
u Push back the union nut of fuel pipe.
u Move up injector about 1 to 2 cm to place high pressure pipe 5 above the adaptor 9.
u Press injector in cylinder head and check alignment of fuel pipe and distributor block.
u Proceed to tightening sequence, see section "Tightening specifications".
Fig. 124: Connecting electrical contacts
u Connect electrical cables on the corresponding solenoid connector.
u Tighten to torque.
Setting values
/
114
© 2019 by Kohler Co. All rights reserved.
Service and Repair Manual
KD83V16 33525088901_1_1 EN_US
2019-02