Safety Instructions For The Fuel System - Kohler KD83V16 Service And Repair Manual

Service and Repair Manual
Information
The manufacturer of the machinery is responsible to design and provide a display to get the
messages and codes generated by the ECU, and to develop, document, implement, and enforce
emergency procedures to be followed in the event of accident or breakdown. If a blockage is likely
to occur, the operating method to be followed so as to enable the machinery to be safely
unblocked.
Refer to the "Electrical Installation Guideline".

2.9.3 Safety instructions for the fuel system

DANGER
Lethal or heavy injury due to flammable fluids under high pressure
When the engine is running, the fuel lines are under a constant pressure of up to
2000 bar (29,007.40 psi).
Fuel escaping under pressure can penetrate the skin and lead to severe injuries, vaporize and
explode when an ignition source is present.
u Never release the screws on the fuel circuit, especially between the high pressure pump and
the injector when the engine is running.
u Before starting any task on the fuel system, ensure the build-up pressure in the circuit has been
released, and the temperature of the engine has cooled down.
u Keep the engine away from heat, sparks, open flame, or any other ignition source.
KD83V16 33525088901_1_1 EN_US
2019-02
(For more information see: 5 Appendix, page 199)
© 2019 by Kohler Co. All rights reserved.
Safety
Prevent property damages
.
57