Subaru Legacy 2021 Owner's Manual page 73

Hide thumbs Also See for Legacy 2021:

Table of Contents

9. Before having a child sit in the child

restraint system, try to move it back and

forth and right and left to check if it is firmly

secured. Sometimes a child restraint

system can be more firmly secured by

pushing it down into the seat cushion and

then tightening the seatbelt.

10. Pull at the shoulder portion of the belt

to confirm that it cannot be pulled out (ALR

properly functioning).

11. Latch the top tether hook onto the

tether anchorage that is located behind the

rear seat and tighten the top tether firmly.

For additional instructions, refer to "Top

Child Restraint Systems

Tether Anchorages" FP74.

12. To remove the child restraint system,

press the release button on the seatbelt

buckle and allow the belt to retract

completely. The belt will return to the

Remember that the head restraint is not

intended to be used at the lowest position

(retracted position). Therefore, when the

rear center seat is occupied (including

when a child restraint system is installed),

be sure to raise the head restraint to the

extended position.

When the child restraint system is no

longer in use, remove it and restore the

ELR function of the retractor. That

function is restored by allowing the

– CONTINUED –

Chapters

Table of Contents