Subaru Legacy 2021 Owner's Manual page 182

176
Illumination Brightness Control
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
. The brightness setting is not can-
celed even when the ignition switch is
turned to the "LOCK"/"OFF" position.
. The operation method of illumina-
tion brightness will differ depending
whether or not "Brightness Dial" in the
center information display is on. Refer
to the operation method indicated the
following table.
"Brightness Dial" is on.
Combi-
Operational
nation
item
meter
Control dial Available Available
"Brightness"*
1
on the center Not avail-
information able
display
"Brightness Dial" is off.
Operational
item
Control dial
"Brightness"
on the center
information
display
*1: When "Brightness Dial" is on,
"Brightness" on the center infor-
mation display is not available.
For details about "Brightness Dial" on/
off settings, refer to "General settings"
Center
FP216 (11.6-inch display models) or
informa-
"General settings" FP234 (dual 7.0-
tion dis-
inch display models).
play
& Auto Dimmer Cancel Func-
tion
Not avail-
When the ambient light is bright, the
able
illumination brightness is set to the max-
imum regardless of the position of the
control dial. In this case, you cannot adjust
the illumination brightness by using the
control dial. When the ambient light is dark,
you can dim the illumination brightness as
described above.
Center
The operational/non-operational setting
Combi-
informa-
and sensitivity of the auto dimmer cancel
nation
tion dis-
function can be changed by your SUBARU
meter
play
dealer. Contact your SUBARU dealer for
details.
Not avail-
Available
able
Not avail-
Available
able