Subaru Legacy 2021 Owner's Manual page 272

266
Mirrors
1) Indicator Light
4. Press the HomeLink button that you
®
would like to program and observe the
indicator light.
. If the indicator light remains constant
green, your device should operate
when the HomeLink
pressed. At this point, if your device
operates, programming is complete.
. If the indicator light rapidly flashes
green, firmly press, hold for two sec-
onds and release the HomeLink
ton up to three times to complete the
programming process. At this point if
your device operates, programming is
complete. If the device does not
operate, continue with the next step
of the programming instructions.
1) "Learn" button
5. At the garage door opener motor,
(security gate motor, etc.) locate the
"Learn", "Smart", or "Program" button. This
can usually be found where the hanging
antenna wire is attached to the motor-head
unit (see the device's manual to identify
button is
®
this button). The name and color of the
button may vary by manufacturer.
NOTE
A ladder and/or second person may
but-
®
simplify the following steps.
6. Firmly press and release the "Learn",
"Smart", or "Program" button. You now
have 30 seconds in which to complete step
7.
7. Return to the vehicle and firmly press,
hold for 2 seconds and release the
HomeLink button up to three times. At
®
this point programming is complete and
your device should operate when the
HomeLink button is pressed and re-
®
leased.