Subaru Legacy 2021 Owner's Manual page 140

134
Remote Keyless Entry System
Access key fob
1) Lock/arm button
2) Unlock/disarm button
3) Trunk lid opener (Legacy)/Rear gate
unlock button (Outback)
4) PANIC button
Transmitter
1) Lock/arm button
2) Unlock/disarm button
3) Trunk lid opener (Legacy)/Rear gate
unlock button (Outback)
4) PANIC button
The remote keyless entry system has the
following functions.
. Locking and unlocking the doors, rear
gate (Outback) and fuel filler lid
. Opening the trunk lid (Legacy)
. Sounding a panic alarm
. Arming and disarming the alarm sys-
tem. For details, refer to "Alarm System"
FP141.
The operable distance of the remote key-
less entry system is approximately 30 feet
(10 meters). However, this distance will
vary depending on environmental condi-
tions. The system's operable distance will
be shorter in areas near a facility or
electronic equipment emitting strong radio
waves such as a power plant, broadcast
station, TV tower, or remote controller of
home electronic appliances.
NOTE
. For models with "keyless access
with push-button start system", the
remote keyless entry system will not
be activated when the push-button
ignition switch is in any position other
than the "OFF" position.
. For models without "keyless access
with push-button start system", the
remote keyless entry system will not
be activated when the key is inserted in
the ignition switch.
. The hazard warning flashers will
flash once or twice when the access
key fob/transmitter button is pressed in
the following cases.
– When locking the doors
– When unlocking the doors
– When unlocking the rear gate
If desired, you can turn the hazard
warning flashers off by operating the
center information display. For details,
refer to "Car settings" FP220. The
setting can also be changed by a