Subaru Legacy 2021 Owner's Manual page 59

4. After confirming that the webbing is not
twisted, insert the anchor tongue plate
attached at the webbing end into the
buckle on the right-hand side until a click
sounds.
. If the belt stops before reaching the
buckle, return the belt slightly and pull it
out more slowly.
. If the belt still cannot be unlocked,
give it a strong pull and let it retract
slightly, then pull it out slowly again.
5. Insert the center seatbelt tongue plate
into the center seatbelt buckle until it
clicks.
6. To tighten the lap part, pull up on the
shoulder belt. And place the lap belt as low
as possible on the hips, not on the waist.
Seatbelts
! Unfastening the seatbelt
1) Button
1. Push the release button of the center
seatbelt buckle (on the left-hand side) to
unfasten the seatbelt.
– CONTINUED –
53
1