Table of Contents
Advertisement
. Remove snow and ice from the
trunk lid before opening it. Not
doing so could cause the trunk
lid to fall after it is opened.
. Do not push the trunk lid forcibly
to close it. It could deform the
metal.
& To Open and Close the Trunk
Lid from Outside
The trunk lid can be opened using the
keyless access function or remote keyless
entry system. For details, refer to the
following section.
. For models with "keyless access with
push-button start system", refer to "Open-
ing trunk (Legacy)" FP123, or "Opening
the Trunk Lid (Legacy)" FP135.
. For models without "keyless access
with push-button start system", refer to
"Opening the Trunk Lid (Legacy)" FP135.
To close the trunk lid, lightly press the trunk
lid down until the latch engages.
NOTE
. Do not leave your valuables in the
trunk when you leave your vehicle.
. Under the following conditions, the
trunk can be opened without the access
key fob.
– The trunk lock/unlock setting is
set to on.
– All doors are unlocked.
The trunk lock/unlock setting can be
changed by a SUBARU dealer. Contact
your SUBARU dealer to change the
setting.
& To Open the Trunk Lid from
Inside
Press and hold the trunk lid opener button
for more than 1 second.
Trunk Lid (Legacy)
& Internal Trunk Lid Release
Handle
The internal trunk lid release handle is a
device designed to open the trunk lid from
inside the trunk. In the event children or
adults become locked inside the trunk, the
handle allows them to open the lid. The
handle is located on the inside of the trunk
lid.
To open the trunk lid from inside the trunk,
pull the yellow handle as indicated by the
arrow on the handle. This operation
unlocks the trunk lid. Then, push up the lid.
The handle is made of material that
remains luminescent for approximately
an hour in the dark trunk space after it is
exposed to ambient light even for a short
time.
– CONTINUED –
149
2
Advertisement
Chapters
Table of Contents
