Subaru Legacy 2021 Owner's Manual page 271

be erased for security purposes.
Refer to "Erasing HomeLink
tons" FP267.
! Programming a New HomeLink
button
1) Indicator Light
2) HomeLink buttons
®
1. Press and release the HomeLink
button that you would like to program.
The HomeLink indicator light will flash
®
orange slowly (if not, refer to "Erasing
buttons" FP267).
HomeLink
®
but-
®
®
1) Garage door opener remote
2. Position the hand-held remote (garage
door opener remote) 1 to 3 inches (2 to 8
cm) away from the HomeLink
you would like to program.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train
®
better at a distance of 6 to 12 inches
(15 to 30 cm). Keep this in mind if you
have difficulty with the programming
process.
3. While the HomeLink
flashing orange, press and hold the hand-
held remote button. Continue pressing the
hand-held remote button until the
button that
®
HomeLink indicator light changes from
®
orange to green. You may now release the
hand-held remote button.
NOTE
Some devices may require you to re-
place this "Programming a New
HomeLink
®
dures noted in the "Gate Operator /
Canadian Programming" section. Refer
to "Gate Operator/Canadian Program-
ming" FP267.
265
Mirrors
indicator light is
®
button" step 3 with proce-
– CONTINUED –
3