Subaru Legacy 2021 Owner's Manual page 440

434
Loading Your Vehicle
2. Remove the plastic plug of the roof rail
holder by using the torque wrench.
3. Remove the bolt of the crossbar by
using the torque wrench and pull this side
out.
4. Pull out the other side of the crossbar
from the roof rail holder by pulling up the
cover.
5. Install both ends of the crossbar into
the other holders.
1) Guide plate
2) Torque wrench
6. Using the torque wrench, tighten the
crossbar bolts until the torque wrench hits
the guide plate.