Subaru Legacy 2021 Owner's Manual page 136

130
Keyless Access with Push-Button Start System
& Selecting Audible Signal Op-
eration
Using an electronic chirp, the system will
give you an audible signal when the doors
are locked or unlocked. If desired, you can
turn the audible signal off by operating the
center information display. For details,
refer to "Car settings" FP220.
Furthermore, the volume setting of the
audible signal can also be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
& Selecting Hazard Warning
Flasher Operation
Using the hazard warning flasher, the
system will give you a visible signal when
the doors are locked or unlocked. If
desired, you can turn the hazard warning
flashers off by operating the center infor-
mation display. For details, refer to "Car
settings" FP220. The setting can also be
changed by a SUBARU dealer. Consult
your SUBARU dealer for details.
& Warning Chimes and Warning
Indicator
The keyless access with push-button start
system is equipped with a warning chime
and the access key warning indicator in
order to minimize improper operations and
help protect your vehicle from theft.
For details, refer to "Warning Chimes and
Warning Indicator of the Keyless Access
with Push-Button Start System" FP191.
& When Access Key Fob Does
Not Operate Properly
Refer to "Access Key Fob – If Access Key
Fob Does Not Operate Properly" FP465.
& Replacing Battery of Access
Key Fob
Refer to "Replacing Battery of Access Key
Fob" FP526.
& Replacing Access Key Fob
Access key fobs can be replaced at
SUBARU dealers. For more details, con-
tact a SUBARU dealer.
& Certification for Keyless Ac-
cess with Push-Button Start
System
. U.S.-spec. models
FCC ID: HYQ14AHK
FCC ID: Y8PFJ18-2
FCC ID: Y8PSSPIMB02
CAUTION
FCC WARNING
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user's authority to operate the
equipment.
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that
may cause undesired operation.