Part Names And Functions; Front/Top - Epson EH-TW5825 User Manual

Introduction

Part Names and Functions

Front/Top

Name
a Lamp cover
b A/V mute slide lever
c Air exhaust vent
d Lens cover
e Foot release lever
f Lens
g Remote receiver
h Air intake vent
Open when replacing the projector's lamp.
Slide the knob to open and close the lens cover.
By closing during projection you can hide the image and audio.
Exhaust vent for air used to cool the projector internally.
Warning
Do not look into the air exhaust vent. If the lamp explodes, scattered
small shards of glass and released gas may cause an injury. If any glass
gets into your eyes or mouth, contact your local physicians immediately.
Caution
While projecting, do not put your face or hands near the air exhaust vent,
and do not place objects that may become warped or damaged by heat
near the vent. Hot air from the air exhaust vent could cause burns, warp-
ing, or accidents to occur.
Close when not using the projector to protect the lens from being scratched
or soiled. p.25
s
Press the foot release lever to extend and retract the front adjustable foot.
p.26
s
Images are projected from here.
Receives signals from the remote control.
Intake vent for air used to cool the projector internally.
6
EH-TW5705
Function
p.65
s
p.23
s
p.31
s