Configuring Parameters Required For Remote Management - Alvarion BreezeMAX Extreme System Manual

Chapter 3 - Commissioning
3.1 Configuring Parameters Required for
Remote Management
After completing the installation process, as described in the preceding chapter,
some parameters must be configured using either Telnet (the Monitor application)
or AlvariCRAFT. These parameters are necessary to enable remote management of
the BTS.
NOTE
AlvariCRAFT can be used only if the Authorized Managers list in the BTS is either empty (default) or
includes the IP address of the AlvariCRAFT station.
Refer to
how to use it. Refer to the AlvariCRAFT User Manual for information on how to
use it.
The basic parameters are listed in
information on the applicable parameters.
Management Option
BTS-Connectivity
Authorized Managers 
(per manager)
BreezeMAX Extreme
Chapter 4 for information on how to access the Monitor application and
Table 3-1: Basic BTS Parameters
Parameters

IP address
 Subnet Mask

Default Gateway
 VLAN ID
 VLAN Priority
 IP Address

Read Community
 Write Community
 Traps Distribution Enabled

Configuring Parameters Required for Remote Management

Table 3-1. Refer to
52
Chapter 4 for detailed
System Manual