Device Network Configuration - Emerson Rosemount 702 Quick Start Manual

Quick Start Guide
3

Device network configuration

In order to communicate with the Smart Wireless Gateway, and ultimately
the host system, the transmitter must be configured to communicate with
the wireless network. This step is the wireless equivalent of connecting wires
from a transmitter to the information system. Using a Field Communicator or
AMS Wireless Configurator, enter the Network ID and Join Key so they match
the Network ID and Join Key of the Gateway and other devices in the
network. If the Network ID and Join Key do not match that of the Gateway,
the Rosemount 702 Transmitter will not communicate with the network. The
Network ID and Join Key may be obtained from the Smart Wireless Gateway
on the Setup Network Settings page on the web interface, shown in
Figure 3‐1.
Figure 3-1:
3.1 AMS Wireless Configurator
1. Right click on the Rosemount 702 Transmitter.
2. Select Configure.
3. When the menu opens, select Join Device to Network.
4. Follow the method to enter the Network ID and Join Key.
14
Gateway Network Settings
Rosemount 702 Wireless Discrete Transmitter
April 2018