Emerson Rosemount 702 Quick Start Manual page 9

Wireless discrete transmitter

Hide thumbs Also See for Rosemount 702:

April 2018

2.2

Remote mount

Figure 2-2:

A. Rosemount 702 Transmitter

B. Float switch

Procedure

1. Install the switch according to standard installation practices making sure

to use thread sealant on all connections.

2. Run wiring (and conduit if necessary) from the switch to the Rosemount

702 Transmitter.

3. Pull the wiring through the threaded conduit entry of the Rosemount 702

Transmitter.

4. Attach the switch wiring to the terminals as indicated on the wiring

diagram (see

5. Connect the black power module.

Quick Start Guide

Remote Mount

Chapter

5).

Quick Start Guide

Table of Contents