Emerson Rosemount 702 Quick Start Manual page 44

Quick Start Guide
7.7 Canada
7.7.1 I6 Canada Intrinsically Safe
Certificate: [CSA] 1143113
Standards: CAN/CSA C22.2 No. 0-10, CSA Std. C22.2 No. 94-M1991
Markings:
Special Conditions for Safe Use (X):
1. The Rosemount 702 Transmitter housing contains aluminum and is
considered a potential risk of ignition by impact or friction. Care must be
taken into account during installation and use to prevent impact and
friction.
2. The surface resistivity of the polymeric antenna is greater than 1GΩ. To
avoid electrostatic charge build-up, it must not be rubbed or cleaned with
solvents or a dry cloth.
3. The model 702 may only be used with either the 701PBKKF Rosemount
Smartpower Black Power Module or the Computational Systems, Inc.
(CSI) MHM-89004.
7.7.2 N6 Canada Class I Division 2
Certificate: [CSA] 1143113
Standards: CAN/CSA C22.2 No. 0-10, CAN/CSA C22.2 No. 94-M91, CSA
Markings:
Special Condition for Safe Use (X):
1. The model 702 may only be used with either the 701PBKKF Rosemount
Smartpower Black Power Module or the Computational Systems, Inc.
(CSI) MHM-89004.
7.8 Europe
7.8.1 I1 ATEX Intrinsic Safety
Certificate: Baseefa07ATEX0239X
Standards: IEC 60079-0: 2011, IEC 60079-11: 2012
44
(R2011), CAN/CSA Std C22.2 60079-0-11, CAN/CSA
60079-11-14, CSA Std C22.2 No. 60529:05, CAN/CSA-C22.2
No. 61010-1-12
Intrinsically Safe Class I, Division 1; Groups A, B, C, and D, T4;
suitable for Class 1, Zone 0, IIC, T4; when connected per
Rosemount drawing 00702-1020; Type 4X
C22.2 No. 213-M1987, CSA Std C22.2 No. 60529:05
Suitable for Class 1, Division 2, Groups A, B, C, and D, T4; Cl. I,
Zone 2, IIC, T4
Rosemount 702 Wireless Discrete Transmitter
April 2018