Verify Operation - Emerson Rosemount 702 Quick Start Manual

Quick Start Guide
4

Verify operation

There are four ways to verify operation: using the optional local display (LCD),
using the Field Communicator, using the Smart Wireless Gateway's
integrated web interface, or by using AMS Suite Wireless Configurator. If the
Rosemount 702 Transmitter was configured with the Network ID and Join
Key, and sufficient time has passed, the transmitter will be connected to the
network.
4.1 Local display
4.1.1 Start-up sequence
When the Rosemount 702 Transmitter is first powered up, the LCD display
will display a sequence of screens: All Segments On, Device Identification,
Device Tag, and then the user chosen variables of the periodic display.
During steady state operation, the LCD display gives a periodic display of user
chosen variables at the configured wireless update rate. These variables can
be selected from a list of six:
• Channel 1 State
• Channel 1 Count
• Channel 2 State
• Channel 2 Count
• Electronics Temperature
• Supply Voltage
Refer to the Rosemount 702
display messages. The chevron-shaped status bar at the top of the screen
indicates the progress of the network join process. When the status bar is
filled, the device is successfully connected to the wireless network.
Searching for network
N E T w K
S R C H N G
16
Reference Manual
Joining network
n e t w k
N E G O T
for error codes and other LCD
Connected with limited
bandwidth
n e t w k
L I M - O P
Rosemount 702 Wireless Discrete Transmitter
April 2018
Connected
n e t w k
O K