Emerson Rosemount 702 Quick Start Manual page 19

April 2018
4.5 Troubleshooting
If the device is not joined to the network after power up, verify the correct
configuration of the Network ID and Join Key, and that Active Advertising has
been enabled on the Smart Wireless Gateway. The Network ID and Join Key in
the device must match the Network ID and Join Key of the Gateway.
Procedure
1. From the Gateway's integrated web interface, select Setup Network
Settings to obtain the Network ID and Join Key (see
Figure 4-3:
2. To change the Network ID and Join Key in the wireless device, use a Field
Communicator and enter the following Fast Key sequence.
Function
Wireless
3. Follow the on screen prompts.
Quick Start Guide
Gateway Network Settings
Fast Key sequence
2, 1, 1
Quick Start Guide
Figure 4‐3).
Menu items
Join Device to Network
19