Emerson Rosemount 702 Quick Start Manual page 5

Wireless discrete transmitter

Hide thumbs Also See for Rosemount 702:

April 2018

1.3

Conduit entry

Upon installation, ensure each conduit entry is either sealed with a conduit

plug using approved thread sealant, or has an installed conduit fitting or

cable gland with appropriate threaded sealant. Note the conduit entries on

the Rosemount 702 Transmitter are threaded ½–14 NPT.

Figure 1-2:

A. Conduit entry

1.4

Field Communicator connections

The power module needs to be installed before the Field Communicator can

interface with the Rosemount 702 Transmitter. This transmitter uses the

Black Power Module; Order model number 701PBKKF or part number

00753-9220-0001.

Quick Start Guide

Conduit Entry

Quick Start Guide

Table of Contents