Device Network Configuration - Emerson Rosemount 708 Reference Manual

Configuration
June 2022
2.3

Device network configuration

To communicate with the Gateway (and ultimately the host system), the transmitter must
be configured to communicate with the wireless network. Using a Field Communicator or
AMS Device Manager, enter the network ID and join key so they match the network ID and
join key of the Gateway and other devices in the network. If they do not match, the
acoustic transmitter will not communicate with the network. The network ID and join key
may be obtained from the Gateway on the Systems Settings>Network>Network Settings
page on the web server, shown in
Figure 2-1: Gateway Network Settings
2.3.1 Configure the network using AMS Device Manager
Procedure
1. Right click on the acoustic transmitter and select Configure.
2. When the menu opens, select Join Device to Network and follow the method to
2.3.2 Field Communicator
The network ID and join key may be changed in the wireless device by using the following
Fast Key sequence. Set both network ID and join key.
Function
Join Device to Network
10
enter the network ID and join key.
Figure 2-1.
Key sequence Menu items
2, 1, 2 Network ID, Set Join Key
Rosemount 708 Wireless Acoustic Transmitter Reference Manual
Reference Manual
00809-0100-4708