Emerson Rosemount 702 Quick Start Manual page 28

Quick Start Guide April 2018
Figure 5-9: Dual Output Circuits with a Common Ground
A. LOAD
B. OUTPUT
If two output circuits are connected to a single Rosemount 702 Transmitter
with a single power supply, both CH + and CMN terminals must be connected
to each output circuit. The negative power supply wires must be at the same
voltage and connected to both CMN terminals.
Figure 5-10: Dual Output Circuits with One Power Supply
A. LOAD
B. OUTPUT
28 Rosemount 702 Wireless Discrete Transmitter