Wireless Considerations - Emerson Rosemount 702 Quick Start Manual

Wireless discrete transmitter

Hide thumbs Also See for Rosemount 702:

Quick Start Guide

Wireless considerations

1.1

Power up sequence

The Smart Wireless Gateway should be installed and functioning properly

before any wireless field devices are powered. Install the Black Power Module,

SmartPower

00753-9220-0001) into the Rosemount 702 Transmitter to power the

device. Wireless devices should be powered up in order of proximity from the

Gateway, beginning with the closest device, then working outward from the

Gateway. This results in a simpler and faster network installation. Enable

Active Advertising on the Gateway to ensure new devices are able to join the

network faster. For more information see the Emerson

Gateway

1.2

Antenna position

The antenna should be positioned vertically, either straight up or straight

down, and it should be approximately 3 ft. (1 m) from any large structure,

building, or conductive surface to allow for clear communication to other

devices.

Figure 1-1:

™

Solutions model number 701PBKKF (part number

Reference

Manual.

Antenna Position

™

Wireless 1420

Rosemount 702 Wireless Discrete Transmitter

April 2018

Table of Contents