Choosing Mounting Location; Unpacking The Shipping Carton; Examining The Unit's Features - VeriFone UX300 Installation Manual

S
ETUP

Unpacking the Shipping Carton

Choosing Mounting
Location
CAUTION
NOTE
Unpacking the
Shipping Carton
To unpack the
shipping carton
WARNING
Examining the
Unit's Features
14
UX300 I
NSTALLATION
Choose a mounting location that ensures the card slot is in full view of the
cardholder during card insertion.
Make sure the installation method does not invalidate the Anti-Removal Switches
(ARS) function. Do not, for instance, install the UX300 in a sub-chassis that can
be removed from the main cabinet.
The front panel of the device meets the IP34 standards for installation under
outdoor environments.
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage.
1
Remove the unit from the shipping carton. The standard package contains the
unit, a grounding cable and a ferrite connector cable for connecting to an
external power supply. Refer to
information about the device's related accessories.
2
Remove any protective wrap before mounting the unit.
3
Save the shipping carton and packing material for future repacking or moving
of the device.
Do not use a unit that has been tampered with or otherwise damaged. This unit
comes equipped with tamper-evident labels. If a label or component appears
damaged, immediately notify the shipping company and your Verifone
representative or service provider.
Before you continue the installation process, review the features of the device
(see Figure 1, Figure 2
MOUNTING
STUD HOLES
Figure 1 UX300 Front View
G
UIDE
Accessories and Documentation
and Figure 3).
CARD READER SLOT
ANTI-REMOVAL SWITCHES (ARS)
for more
LEDS
MOUNTING
STUD HOLES