Connecting To A Ux-Series Peripheral Device - VeriFone UX300 Installation Manual

•
•
•
•
Connecting to a PC
You can connect the UX300 to a host PC with any of the following connection
options:
•
•
•
For more information regarding your card reader configuration and your cabling
needs, contact your local Verifone service provider. For cable ordering
information, see
Connecting to a This section discusses the connection of the UX300 device with the following
UX-Series
peripheral units:
Peripheral Device
•
•
Connecting to a UX1xx Series PIN Pad
You can connect the UX300 to a UX1xx-series PIN pad device with a standard
USB Type A to B connection (VPN
Figure 11
Connect the Type A plug in the UX300 high-powered port and connect the type B
plug to the USB port of the UX110. Use the same procedure for connecting to
other UX1xx-series PIN pads.
USB Type B
ETH (LAN)
COM (RS-232)
MDB
RJ45 to RS-232 connection
USB Type B connection
LAN connection
Accessories and
Connecting to a UX1xx Series PIN Pad
Connecting to a UX400 CTLS Unit
Connecting to a UX110 PIN Pad
Documentation).
.
CBL000-045-01-A)
UX110
S
Cable Connections
UX300 I G
NSTALLATION UIDE
ETUP
23