Table of Contents
Advertisement
4
NOTE
We recommend using Verifone USB cables (see
Documentation) for uniformity in cable connector sizes.
5
6
Mounting the
Use the following procedure to mount the UX300 to a suitable mounting surface.
Device
For proper operation of the Anti-Removal Switches (ARS), do not use additional
CAUTION
gaskets or washers. Use the unit and its accessories as they are upon removing
from the packaging.
CAUTION
Make sure that your mounting frame has a thickness of 2 mm.
NOTE
Your mounting surface may have different installation instructions. Refer to the
user guide of your mounting device for further information.
1
To mount the unit
Figure 17
2
Slot the third retainer's legs in the holes of the main retainer, over the installed
USB cables on the model-dependent board. See D in
Swing the retainer down to lock in place over the USB cables and make sure
the screw holes align with the main cable retainer. See E in
Secure the retainer with two hex screws to lock the USB cables in place. See
F in
Figure
16.
Align the UX300 stud holes with the holes on the mounting surface.
A
Mounting the UX300
Place the reader flush onto the mounting slot.
Mounting the Device
Figure
16.
Accessories and
Figure
B
UX300 I
NSTALLATION
S
ETUP
16.
27
G
UIDE
Hide quick links:
Advertisement
Table of Contents
