Cable Connections; Connecting To A; Ux-Series Host Device - VeriFone UX300 Installation Manual

S
ETUP

Cable Connections

Cable
Connections
NOTE

Connecting to a

UX-Series Host
Device
22
UX300 I
NSTALLATION
5
Carefully slide the SIM card into the slot, by aligning the card and carefully
sliding into the slot until fully inserted.
Figure 10 Inserting the SIM Card
6
Close the SIM cardholder.
7
Slide the locking tab to the
8
Replace the rubberized SIM Card cover.
9
Attach the GPRS antenna (VPN ANT159-300-01-A
the antenna port on the UX300. Tighten to the recommended torque of 7.0
kgfcm.
The UX300 rear panel holds several interface ports for power and
communications. Use this section to see how the UX300 connects to various UX-
series units, as well as other devices.
•
Connecting to a UX-Series Host Device
•
Connecting to a UX-Series Peripheral Device
•
Connecting Optional Devices
To get the proper connection cables, please refer to
Documentation.
This section discusses the connection of the UX300 device with the following host
units:
•
Connecting to a Vending Machine
•
Connecting to a PC
Connecting to a Vending Machine
You can connect the UX300 to a host vending machine (VM) with any of the
following connection types:
G
UIDE
position.
LOCK
Accessories and
by screwing the base to
)