Selecting Unit Location; Unpacking The Shipping Carton - VeriFone UX301 Installation Manual

S
ETUP

Selecting Unit Location

Selecting Unit
Location
Choosing Mounting
Location
CAUTION
NOTE
Unpacking the
Shipping Carton
To unpack the
shipping carton
WARNING
10
UX301 I
NSTALLATION
Use the following guidelines when selecting a location for your device.
•
Select a location convenient for the customer.
•
Avoid dusty, hot or damp locations.
•
To minimize data reading or writing errors, pick a location free from magnetic
interference. Choose a spot a safe distance away from objects or units that
generate magnetism.
•
Install the unit not more than 0.8m away from the UX401 CTLS Reader.
Choose a mounting location that ensures the card slot is in full view of the
cardholder during card insertion.
Make sure the installation method does not invalidate the Anti-Removal Switch
(ARS) function. Do not, for instance, install the UX301 in a sub-chassis that can
be removed from the main cabinet.
The front panel of the device meets the IP34 standards for installation under
outdoor environments.
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage.
1
Remove the unit from the shipping carton. The standard package contains the
unit, a grounding cable and a ferrite connector cable (VPN CBL159-309-01-B)
for connecting to an external power supply. Refer to
Documentation
2
Remove any protective wrap before mounting the unit.
3
Save the shipping carton and packing material for future repacking or moving
of the device.
Do not use a unit that has been tampered with or otherwise damaged. This unit
comes equipped with tamper-evident labels. If a label or component appears
damaged, immediately notify the shipping company and your Verifone
representative or service provider.
G
UIDE
for more information about the device's related accessories.
Accessories and