Table of Contents
Advertisement
S
ETUP
Cable Connections
To connect the UX300
to the UX400 CTLS
NOTE
Connecting
Optional Devices
24
UX300 I
NSTALLATION
Connecting to a UX400 CTLS Unit
You can connect the UX300 to a UX400 contactless unit using an 8-pin to RJ45
cable (VPN
CBL159-301-01-A)
1
Connect the 8-pin connector to the UX300 and connect the RJ45 plug to the
UX400, make sure both devices are not more than 0.5 m away from each
unit
other.
2
Attach one end of the SMA cable to the UX300 and the other end to the
UX400.
Figure 12
Connecting to a UX400 CTLS Unit
Tighten the SMA cable at both ends by holding the end cap and turning. Avoid
holding the strain relief cord while tightening the end caps.
The UX300 host device installs the UX400 upon startup.
The UX300-Petrol can connect to various peripheral devices outside of the UX-
Series product range.
Connecting to a TG-2460H Printer
You can connect a UX300-Petrol unit to an external printer, such as Verifone's
TG-2460H printer, using a combination RS-232 to RJ45 cable (VPN
.
01-A)
G
UIDE
and an SMA connector (VPN
SMA
8-Pin
CBL159-302-02-A)
UX400
RJ-45
SMA
CBL159-305-
.
Hide quick links:
Advertisement
Table of Contents
