Installing Usb Cable Retainers - VeriFone UX300 Installation Manual

S
ETUP

Installing USB Cable Retainers

Installing USB
Cable Retainers
NOTE
To install USB cable
retainers
26
UX300 I
NSTALLATION
After connecting peripherals and other devices to the UX300, you can secure
USB cables by installing retainers (VPN SUB159-305-01-A). Use the following
steps to install the cable retainers.
We recommend using Verifone USB cables (see
Documentation) for uniformity in cable connector sizes.
After you connect USB cables to the UX300, install the following retainers to
secure the cables in place.
A
Figure 15 Installing First Two Cable Retainers
1
Position the main cable retainer on the lip of the persistent board. See A in
Figure 15.
2
Place the three-pronged cable retainer over the two USB cables on the
persistent board. See B in
3
Fasten two hex screws to hold down the two retainers. See C in
D
Figure 16 Installing Third Cable Retainer
G
UIDE
Accessories and
B
Figure 15.
E
C
Figure 15.
F