11
SERVICE WORK ON THE CHASSIS
11.23
Installing the fuel tank at the front
11.24
Checking the chain for dirt accumulation
Main work
–
Pull off the fuel tank breathers
–
Remove screws
601354-10
–
Open the quick release of the fuel line
–
Remove screws
–
Remove the fuel tank on the left and right.
Info
Set the fuel tank halves down in an upright position as otherwise fuel can
escape from the fuel tank breathers at the filler cap.
601355-10
Main work
–
Position the fuel tank. Mount and tighten screws
Guideline
Screw, front fuel tank
–
Clean quick release of fuel line
–
Repeat the operation on the opposite side.
601355-11
–
Mount and tighten screws
Guideline
Screw, front fuel tank
–
Connect the hoses
601354-11
Finishing work
–
Mount the seat. (
–
Mount the trim. (
–
Check the chain for coarse dirt accumulation.
»
If the chain is very dirty:
–
Clean the chain. (
400678-01
.
1
.
2
on the left and right.
3
of the left and right halves of the fuel tank.
4
and connect it.
2
.
3
of the fuel tank breather without kinking.
4
p. 48)
p. 57)
p. 52)
.
1
M8
8 Nm (5.9 lbf ft)
M8
8 Nm (5.9 lbf ft)
51