Di-Tmp Tab - National Instruments NI DIDS-2103 User Manual

4.5.1 DI-TMP Tab

The DI-TMP tab is for configuring Triggered Multi-Pulse (TMP) injection command pulse sequences with up to
6 pulses per sequence. Below is a timing diagram showing the effect of each parameter. An independent TMP
command sequence is provided for each DI Driver module. The TMP command sequence associated with a DI
Driver module can be configured to apply to all channels of that module or each channel can be configured to have
its own sequence. The configured TMP command sequence can be triggered to a specific channel via a button
associated with each channel of each DI Driver module.
Figure 4.5.1.a. Pulse Train illustration for TMP, TMP OneShot and PID/PWM-TMP Mode
NI DIDS-2100 Series User Manual | © National Instruments | 93