The purpose of the VR/Hall Input Setup window is to configure the operation of each of the NI 9760 VR/Hall input
channels. Each of the six channels can be configured to operate in one of four modes: VR Adaptive Arm (the default
mode), VR Manual Arm, Hall, or Hall with Pull-up.
VRHall_Module_Present
Tip Strip: VR Hall Module Present
Detail: Reports presence of NI 9760 VR/Hall module in chassis.
VRHallFaultClear
Tip Strip: VR Hall Fault Clear
Detail: Clears a fault condition where an input voltage is too negative to safely engage pull-up resistor on the
positive(+) side of input channels.
4.3.2 VR/Hall Setup Window
NI DIDS-2100 Series User Manual | © National Instruments | 87