Auxiliary Pwm Setup Window - National Instruments NI DIDS-2103 User Manual

The purpose of the Auxiliary PWM Setup window is to configure up to four independent internally generated Pulse
Width Modulation (PWM) signals to be assigned to digital input destinations via the
timing specification can be Frequency or Period, and the control specification can be Duty Cycle or Pulse Width.
AuxPWMX-TimingMode
Tip Strip: Format of PWM signal command
Detail: Selects the specification mode for the time between rising edges of the PWM signal. The options are
Frequency or Period. The fields for Frequency or Period will be enabled according to the selection.
AuxPWMX-ControlMode
Tip Strip: Format of PWM signal command
Detail: Selects the specification mode for the time between rising and falling edges of the PWM signal. The
options are Duty Cycle or Pulse Width. The fields for Duty Cycle or Pulse Width will be enabled according
to the selection.
172 | ni.com | NI DIDS-2100 Series User Manual

4.12 Auxiliary PWM Setup Window

Digital Input Setup window. The