Tdk Hv Supply Control Setup - National Instruments NI DIDS-2103 User Manual

4.15 TDK HV Supply Control Setup

The purpose of the TDK HV Supply Control Setup window is to remotely configure the TDK High Voltage Power
Supply (via cabling shown below) for providing external high voltage power supply to the DI Driver module(s) – pins
7 and 8 on the DI Driver connector. The DB9 to RJ45 cable pin-out is shown below according to the TDK power
supply manual downloadable from TDK website.
Figure 4.15.a, RJ45 to DB9 Pinout
184 | ni.com | NI DIDS-2100 Series User Manual