Pfi And Ls Driver Setup Window - National Instruments NI DIDS-2103 User Manual

4.2 PFI and LS Driver Setup Window

The purpose of the PFI and LS Driver Setup window is to configure the operation of the PFI Driver module. Three
tabs are provided for the following:
PFI Module Control Tab: Enable the PFI Driver module, configure the operating mode, test PFI channels with one-
shot pulses, and monitor module faults.
PFI 1-4 Tab: Enable individual PFI Driver PFI channels 1-4 and configure current control parameters.
LS 1-4 Tab: Enable individual PFI Driver lowside channels 1-4 and configure the Pulse Width Modulation (PWM)
parameters.
The PFI Driver module is an optional module. This setup window is only applicable if the PFI Driver module is
inserted in the DI Driver System.
72 | ni.com | NI DIDS-2100 Series User Manual