Pfi Module Control Tab - National Instruments NI DIDS-2103 User Manual

The purpose of the PFI Module Control Tab is to enable the PFI Driver module, configure the operating mode, test
PFI channels with one-shot pulses, and monitor module faults.
PFI_ModulePresent
Tip Strip: Indicates PFI Driver module present and externally powered
Detail: Indicates the presence and recognition of the PFI Driver module. The module will only be recognized
when PFI_ModuleEnable
properly externally

4.2.1 PFI Module Control Tab

is ON, a PFI Driver module is inserted in the
powered.
assigned slot, and the module is
NI DIDS-2100 Series User Manual | © National Instruments | 73